Contact Us
EPG Commander
U.S. Army Electronic Proving Ground
ATTN: TEEP-CO
2000 Arizona Street
Fort Huachuca, AZ 85613-7063
Comm: (520) 538-8888 DSN 879
Customer Support
New and Current Customer Support
Comm: (520) 533-8204 DSN 821
Email: usarmy.huachuca.atec.list.epg-customersupport@army.mil
EPG Protocol Officer
Comm: (520) 538-2382 DSN 879
Email: usarmy.huachuca.atec.list.epg-protocol@army.mil
Instrumentation
EPG Instrumentation Help Desk
Email: usarmy.huachuca.atec.list.epg-instrumentation-helpdesk@army.mil
Visitor Information
It is Command policy that all visitors to the Electronic Proving Ground report to the Visitor Control Center (Building 56303) located at the entrance to Banister Hall (Building 56301) for visit validation, badge pickup and registration prior to visiting any of our administrative facilities, test facilities or range areas.
Fort Huachuca entrance gate hours of operation:
- BUFFALO SOLDIER GATE
- Open to vehicles, pedestrians and bicycles 24/7.
- VAN DEMAN GATE & VISITOR CONTROL CENTER
- Open to vehicles, pedestrians and bicycles.
- Monday-Friday, 5:30 a.m.-5:30 p.m.
- Closed on weekends and holidays.
*When the Van Deman Gate & Visitor Control Center is closed, the Buffalo Soldier Gate will issue limited passes, valid for up to 30 days.
For more information regarding access to Fort Huachuca, please click HERE.
EPG Visitor Control
Location: Bldg. 56303, Arizona Street, Fort Huachuca
Hours of operation: 0630-1600
Visitor Control: 520-538-2424
Security Points of Contact
- Chief, USAEPG Security
520-538-3534 DSN 879 - Special Security Officer (SSO), SCIF Manager
520-533-8031 - Special Security Representative (SSR)
520-533-8031 - Personnel Security Officer, Information Security
520-533-8031 - Physical Security Officer
520-533-8031 - COMSEC, CCI Manager
520-533-8293 - Emergency Management, OPSEC, Antiterrorism (Force Protection) Officer
520-538-3534
Area Directions
Tucson International Airport to Sierra Vista
From the Airport exit, follow Country Club Dr to Valencia Rd. Turn right on Valencia Rd. Continue on Valencia to the I-10 East entrance (toward El Paso). Drive approximately 40 miles on I-10 to exit 302. Turn south on Hwy 90. Drive approximately 30 miles to Fort Huachuca and Sierra Vista.
Fort Huachuca Van Deman Gate to EPG
From the guard checkpoint, drive approximately 0.3 miles to the first traffic light (Hunt Ave). Turn right on Hunt Ave. Drive to the intersection of Hunt Ave and Arizona Street. Both EPG HQ (Banister Hall, Bldg. 56301) and the EMETF (Bldg. 55350) are located at this intersection.
Fort Huachuca Buffalo Soldier Gate to EPG
From the guard checkpoint, continue driving on Squire Rd. Turn right onto Irwin Ave. Turn right onto Hatfield St. Turn left onto Hunt Ave (traffic light). Drive to the intersection of Hunt Ave and Arizona Street. Both EPG HQ (Banister Hall, Bldg. 56301) and the EMETF (Bldg. 55350) are located at this intersection.
Lodging Information
IHG Army Hotel
(520) 458-9066
https://www.ihg.com/armyhotels/hotels/us/en/reservation
Notice: The appearance of external hyperlinks does not constitute endorsement by the U.S. Army of this Web site or the information, products, or services contained therein. For other than authorized activities such as military exchanges and MWR sites, the U.S. Army does not exercise any editorial control over the information you may find at these locations. Such links are provided consistent with the stated purpose of this Web site.
Visit Requests, Security Clearance, and Special Access
Visit requests are MANDATORY for everyone!
Visit requests may be sent via the Defense Information System for Security (DISS) or emailed (signed business letterhead memo) to usarmy.huachuca.atec.list.epg-visitorcontrol@army.mil
The following information is required in a business letterhead memo:
- Full Name, military rank, US government civilian grade and/or position title
- SSN (last 4)
- Citizenship
- Investigation type and date completed
- Clearance, date granted and granting authority
- Date and place of birth
- Inclusive dates of visit; if recurring, we recommend you PERMCERT for 1 year
- Name and telephone number of EPG POC (employee to be visited); please do not list the EPG Security Office as the POC
- Purpose of Visit. Be specific; name the test, conference, meeting, etc.
- Your request must indicate signatory verification by a security officer who oversees your security clearance status
- Note 1: Contractors visiting EPG must submit the Visit Authorization Letter through their responsible Facility Security Officer (FSO) IAW DOD 5220.22-M, chapter 6-103
- Note 2: If an investigation is past the expiration date, please include the date of periodic reinvestigation submission
- Note 3: Do not provide Special Security Office (SSO) access information (see below)
Allow a minimum of one hour after sending a visit request email, then call the EPG Visitor Center at 520-538-2424 to confirm receipt. DISS-transmitted collateral clearance visit requests should be sent to SMO code: W04YAA.
- Note 4: In addition to sending clearance or access requests through the SSO system, a collateral visit request must also be sent to the EPG Security Office, W04YAA
Foreign Visit Requests
All requests for official Government-to-Government visits by foreign personnel are conducted through established Embassy protocols.
Foreign commercial contacts: Please refer questions and coordination through the USAEPG Foreign Disclosure Officer, 520-538-3534 DSN 879.